FAQ

|Modular F.R.L.

Does the air pressure need to be released in order to supply an AL series lubricator with turbine oil?

The AL30/40/50/60 are equipped with a check valve on the body.
Therefore, lubricant can be supplied by removing the lubrication plug even when the product is pressurized.
Loosen the lubrication plug slowly, by about 1 turn, to release the pressure inside the bowl.
When pressure in the bowl is released, remove the lubrication plug and supply lubricant. Closing the lubrication plug increases the pressure inside the bowl.
Note) For the AL10, after releasing the inlet pressure, remove the bowl and supply lubricant. And for the AL20, after releasing the inlet pressure, remove the lubrication plug and supply lubricant.