FAQ

|Air Cylinders

Can the CXS series dual rod cylinder plate be removed? Also, is it possible to get a seal replacement manual?

This explanation is based on the “Construction” section of the CXSM10 to 32 in the operation manual.
Loosen and remove the hexagon socket head set screw ⑬ and the hexagon socket head cap screw ⑫ holding the plate ⑤ and rods ② and ③, and then pull the plate out from the rod. Loctite is applied to the screws, so it may be difficult to remove them. For the hexagon socket head cap screw ⑫, as piston rod B ③ does not have a non-rotating construction, loosen the rod by holding it in place using a gear puller, etc., so as not to damage the rod.
For details on how to replace the seals of CXS series cylinders, refer to the operation manual.